2" Reflex suction strainer

Advanced Flexible De-watering and Filtration Devices for Harsh Environments

Patent Pending no. 2015902356 - Australian Design Registration Number 362894 - United States of America Design Application Number 29/549,353 - International (PCT) Patent Application Number PCT/AU2016/050160

Born out of the high demands of the Australian underground mining environment, the Reflex Suction Strainer is designed to survive in hostile and high traffic environments. Moulded from an advanced blend of polymer rubbers, the Reflex Suction Strainer can handle extreme conditions including being run over by vehicles and machinery. The Reflex Suction Strainer costs less than conventional strainers, saving time in cleaning and replacements. Reflex Suction Strainers are safe to use and manufactured in accordance to ISO:9001 .

Applications

  • Underground and open cut development areas affected by excess water

  • Roadways subject to constant inundation with water

  • Any mining areas with high levels of water affecting production

  • The mining hose with flexible strainer is simply laid on the ground in the water affected zone and pumping may commence

  • No steel parts, bore holes or infrastructure needed from suction area to pump

Safety

  • The product uses vulcanised polymers eliminating sharp edges and reducing hand injuries (no metal) inherent in normal metal strainers

  • Removal of submersible steel objects and sharp objects, reducing trip and cut hazards

  • Lightweight and flexible design, meaning less impact on personnel and machinery when in contact

  • Quick and easy to clean, so personnel will spend less time in heavy traffic areas repairing or replacing equipment

Cost Savings

  • Does not corrode, therefore reduced replacement required

  • Sustains many heavy contacts without breaking allowing the part to last longer

  • Longer-lasting parts protect the pumps for longer periods, leading to less downtime, personnel intervention and repair and maintenance

  • No need to drill costly bore holes and associated equipment in development roadways as the product can be used directly on roads and in direct contact with machinery

  • More cost-effective pumps can be used keeping operating and capital costs down (diaphragm v submersible)

Specifications

Flow rate  >850 litres per minute

Filtration flow    9 x surface area to suction aperture

Elongation   Safe capability 450%

Length  370mm

Width  63mm

Weight  approx. 550g

Hardness  >60 - 70 shore A

Temp. range    Safe -66°c to 100+°c

Colour  Yellow/Black

Size  2”

Hole Size  8mm

Vulcanised elastomeric compound - Manufactured in accordance to ISO9001 - Supports in excess of 100 tonnes of downward pressure - Fast attachment & detachment to Camlock fitting - No hose clamp required for hose tail fitting